电子拖布轮 Cloth Dragging Machine
型号 Type：CDW-01
用途：适用各品牌单/双针车、长臂车、包缝机等缝制时辅助向后拉布。
Suitable for single/double needle sewing machine and long-arm sewing machine of various brands.
特点Characteristics
1.使用步进电机驱动拖轮，具有拖布/送布跟随精度高，误差小；
1.Use stepping motor to drive the wheel, with high tracking precision and small error of the cloth feeding.
2.机器通过增加的电子编码器、接近开关等，随时保持顺缝/倒缝、抬压脚抬起时拖轮自动跟随抬起等；
2.By adding electronic encoder, proximity switch, etc., the machine can keep the following of forward/reverse
seam at any time, and the wheel will automatically follow and lift when the pressure foot is lifted, etc.
3.在调节面板上同步微调；可设定拖轮延时落下的针数；
3.Synchronous fine tuning, just operate on the adjustment panel. The function of delaying put down wheel can
set the number of delayed pins.
4.安装方便，只需更换机头面板上的三个螺钉；拖轮上下、前后、左右均可自由调节；
4.Convenient installation. Only three screws on the head panel of the machine need to be replaced. Freely
adjustment of the wheel from top to bottom, front to back, and left to right.
5.特制细齿同步带拖布，柔软摩擦力大，后部空间大，机器停止超过30秒时马达自动断电，环保节能;
5.The special fine tooth synchronous belt has high soft friction force, with largerear space. When the machine
stops for more than 30 seconds, the motor will be automatically cut off, environmentally friendly and energy-saving.
主要性能和技术参数Main Performance and Technical Parameters
